Here's why the deburring machine is important:
One: The impact of burrs on the performance of components and the performance of the whole machine.
1, the impact of parts wear, the greater the burr on the surface of the part, the more energy consumed to overcome the resistance. If there is a burr, there will be a fit deviation, the rougher the fit part on the unit area, the greater the pressure on the unit area, the more easily the surface is worn. So you need a deburring machine, a polishing machine to deburring
2, corrosion resistance, parts after surface treatment burr parts are easy to be touched and fall off, will damage the surface of other accessories, while the burr surface will form a new surface without surface protection, in wet conditions, these surfaces are more prone to rust and mildew, thus affecting the corrosion resistance of the whole machine. So you need a deburring machine, a polishing machine to deburring
Two: The impact of burrs on subsequent processes and other processes.
1. The first processing burr of the base surface is too large, which will lead to uneven processing allowance.
Uneven retention of material due to excessive burrs, resulting in a sharp increase or decrease in spindle cutting volume, resulting in cutting smoothness or machining stability. So you need a deburring machine, a polishing machine to deburring
2, if there is a burr in the base level, the base level is easy to coincide, resulting in inaccurate processing size. So you need a deburring machine, a polishing machine to deburring
3, in the surface treatment process, such as spraying plastic, the coating metal first gathered in the tip of the burr part (static electricity is easier to adsorb), resulting in the lack of plastic powder in other parts, resulting in unstable quality. So you need a deburring machine, a polishing machine to deburring
4, burrs in the heat treatment process is easy to produce bonding, often destroy the interlayer insulation, resulting in a significant decline in the AC magnetism of the alloy, so in the heat treatment of some special materials such as soft magnetic nickel alloy, must first remove burrs. So you need a deburring machine, a polishing machine to deburring
Three: The importance of removing burrs. So you need a deburring machine, a polishing machine to deburring
1. Reduce and avoid the presence of burrs that affect the positioning and widening of mechanical parts and reduce the processing accuracy.
2. Reduce workpiece scrap rate and reduce operator's risk.
3. Eliminate the wear and failure of mechanical parts caused by the uncertainty of burrs during use.
4. Burr free mechanical parts coating adhesion will increase, so that the coating texture is uniform, uniform appearance, smooth and clean, the coating is firm and durable.
5. Mechanical parts with burrs are prone to cracks during heat treatment, reducing the fatigue strength of parts, and deburring cannot exist for parts bearing loads or parts running at high speed.
